High Power Resistors Microwave T-Pads
 |
Component General's Microwave |
|
Component General's Microwave |
Terminals: |
Rods: Terminal Areas are Nickel/Tin Plated which reduces oxidation thus providing a more solderable terminal.
Propretary resistor material.
Discs: Platinum silver terminal material, on both sides connected with wrap-around terminals on I.D. and O.D. Resistor on one side only. Proprietary film resistor. |
|---|---|
Load Life: |
The maximum anticipated change in resistance is ±1% when operated at listed rating for 1,000 hours. |
Temperature Coefficient: |
Standard Temperature Coefficient is -200 to -300 PPM/°C. |
Std. dB Range: |
Offered in a standard dB range of 3 - 20 dB Other values available on request. |
Power Rating: |
Power ratings are based on 70° C temperature, derated linearly to zero power at 200° C. Surface temperature should not exceed 200° C. |
Temperature Range: |
-55°C to +200°C. |
Substrate: |
Beryllium Oxide Ceramic (Note: Letter "P" Denotes Beryllium Oxide.) |
 |
| C62T250P |
|---|
| 10 W | Nominal Power | 1 - 30 | Attenuation (dB) |
|---|---|---|---|
| 0.240" - 0.257" | Disc Diameter | 0.020" - 0.027" | Disc Thickness |
| 0.060" - 0.066" | Rod Diameter | 0.370" - 0.382" | Rod Length |
| Std. Resistance Range: | |||
| 10 - 500 Ω Other values available on request. | |||
| Click on a P/N to open a more detailed data sheet for that part. | |||
 |
| C135T375P |
|---|
| 20 W | Nominal Power | 1 - 30 | Attenuation (dB) |
|---|---|---|---|
| 0.372" - 0.380" | Disc Diameter | 0.030" - 0.036" | Disc Thickness |
| 0.120" - 0.130" | Rod Diameter | 0.493" - 0.509" | Rod Length |
| Std. Resistance Range: | |||
| 10 - 500 Ω Other values available on request. | |||
| Click on a P/N to open a more detailed data sheet for that part. | |||