Download PDF

Component General's Microwave T-Pads High Power Resistors are offered in standard dB range of 3-20 dB with power ratings available at 10 and 20 watts. Special requests are available.

Specifications

• Standard dB Range: Offered in a standard dB range of 3 - 20 dB
• Terminals:
  Rods: Terminal Areas are Nickel/Tin Plated which reduces oxidation thus providing a more solderable terminal. Propretary resistor material.
  Discs: Platinum silver terminal material, on both sides connected with wrap-around terminals on I.D. and O.D. Resistor on one side only. Proprietary film resistor.
• Temperature Coefficient: Standard Temperature Coefficient is -200 to -300 PPM/Deg. C.
• Load Life: The maximum anticipated change in resistance is ±1% when operated at listed rating for 1,000 hours.
• Power Rating: Power ratings are based on 70 Deg. C temperature, derated linearly to zero power at 200 Deg. C. Surface temperature should not exceed 200 Deg. C.
• Temperature Range: -55 Deg. C to +200 Deg. C.
• Substrate: Beryllium Oxide Ceramic (Note: Letter "P" Denotes Beryllium Oxide.)